Menu
Specially designed for dealership warranty requirements that ensure extended drivetrain warranty compliance. It features fast-curing, sensor-safe, low odor, and non-corrosive formulation that meets performance specs of OE silicone gaskets. It forms reliable “formed-in-place” gaskets that resist cracking, shrinking, and migration caused by thermal cycling. It is permanently flexible and stable at between -80 °F to 625 °F (-62 °C to 330 °C). It is also resistant against automotive fluids.
Specially designed for dealership warranty requirements that ensure extended drivetrain warranty compliance. It features fast-curing, sensor-safe, low odor, and non-corrosive formulation that meets performance specs of OE silicone gaskets. It forms reliable “formed-in-place” gaskets that resist cracking, shrinking, and migration caused by thermal cycling. It is permanently flexible and stable at between -80 °F to 625 °F (-62 °C to 330 °C). It is also resistant against automotive fluids.
Rear valve covers, oil pans, timing covers, water pumps, thermostat housing, transmission pans etc.
Grey
3.52 oz (100 g) tube carded
Inner Box:12, Outer Carton:144
A 100% RTV Silicone Sealant formulated for heavy duty applications. It makes reliable “formed-in-place” gasket that resist cracking, shrinking and migration caused by thermal cycling. Ideal to replace almost any cut gasket. Also use to seal, bond, repair, mend and secure glass, metal, plastics, fabric, vinyl, weather stripping and vinyl tops.
A two-component epoxy designed to form a tough adhesive material that is resistant to weathering, and even certain acids. It exhibits high mechanical strength and high heat resistance. It contains no solvent that causes shrinkage, or cracking. It allows easy workability and bonding to most surfaces.
A rapid setting, general purpose, 1:1 mix ratio epoxy adhesive. It exhibits a remarkable combination of properties; fast setting, good resistance towards water, most solvents and automotive oils. It can be used as an adhesive on various substrates, to fill gaps and surface repairs. It can be sanded, does not shrink upon curing and does not crack if drilled. It cures clear can be handled after an hour.
An instant-grab adhesive sealant based on advanced MS Polymer technology. It holds the substrate instantly, reducing the need for bracing requirement.
