An original gasket maker formulated for heavy duty applications. It forms reliable “formed-in-place” gaskets that resist cracking, shrinking and migration caused by thermal cycling. Ideal to replace almost any cut gasket and can be used to coat pre-cut gaskets to increase reliability. It is permanently flexible and stable at temperature of between -80 °F to 600 °F (-62 °C to 315 °C). It is also highly resistant to automotive fluids.
An original gasket maker formulated for heavy duty applications. It forms reliable “formed-in-place” gaskets that resist cracking, shrinking and migration caused by thermal cycling. Ideal to replace almost any cut gasket and can be used to coat pre-cut gaskets to increase reliability. It is permanently flexible and stable at temperature of between -80 °F to 600 °F (-62 °C to 315 °C). It is also highly resistant to automotive fluids.
Rear valve cover, oil pans, timing covers, water pumps, thermostat housing, transmission pans etc.
Black
3.0 oz (85 g) tube carded, 2.47 oz (70 g) tube carded
Inner Box:12, Outer Carton:144
An original gasket maker formulated for high temperature and heavy duty applications. It forms reliable “formed-in-place” gaskets that resist cracking, shrinking and migration caused by thermal cycling. Ideal to replace almost any cut gasket and can be used to coat pre-cut gaskets to increase reliability. It is permanently flexible and stable at temperature of between -80 °F to 650 °F (-62 °C to 343 °C). It is also highly resistant to automotive fluids.
A two-component epoxy designed to form a tough adhesive material that is resistant to weathering, and even certain acids. It exhibits high mechanical strength and high heat resistance. It contains no solvent that causes shrinkage, or cracking. It allows easy workability and bonding to most surfaces.
A medium setting (30 minutes), fiberglass-reinforced polymer compound that enables permanent repairs to many surfaces including fiberglass, concrete, ceramic, glass, metals, wood and many plastics. It is specially formulated to adhere surfaces exposed to damp or underwater (salt or fresh) conditions. Once cured, it can be drilled, screwed, machined, filed or painted. It will not rust, shrink or pull away. It is resistant to water, temperature extremes, and chemicals such as hydrocarbons, alcohols, esters, and dilute acids.
A rapid setting, general purpose, 1:1 mix ratio epoxy adhesive. It exhibits a remarkable combination of properties; fast setting, good resistance towards water, most solvents and automotive oils. It can be used as an adhesive on various substrates, to fill gaps and surface repairs. It can be sanded, does not shrink upon curing and does not crack if drilled. It cures clear can be handled after an hour.
