Menu
An original gasket maker formulated for heavy duty applications. It forms reliable “formed-in-place” gaskets that resist cracking, shrinking and migration caused by thermal cycling. Ideal to replace almost any cut gasket and can be used to coat pre-cut gaskets to increase reliability. It is permanently flexible and stable at temperature of between -80 °F to 625 °F (-62 °C to 330 °C). It is also highly resistant to automotive fluids.
An original gasket maker formulated for heavy duty applications. It forms reliable “formed-in-place” gaskets that resist cracking, shrinking and migration caused by thermal cycling. Ideal to replace almost any cut gasket and can be used to coat pre-cut gaskets to increase reliability. It is permanently flexible and stable at temperature of between -80 °F to 625 °F (-62 °C to 330 °C). It is also highly resistant to automotive fluids.
Rear main bearing cap split line, damper keyway sealing, differential cover, intake end seals, OHC cap, oil pan corner seals, oil pan gasket, side cover plate, thermostat housing, timing cover, transmission pan, valve cover gasket, vibration damper, water pump cover gasket and intake manifolds.
Grey
3.0 oz (85 g) tube carded, 2.47 oz (70 g) tube carded
Inner Box:12, Outer Carton:144
Gasket Shellac is a hard setting, slow drying liquid for gaskets repairing and sealing. It can seal the metal gasket and threaded connections for light duty service. It is suitable also for felt, paper, rubber and composition type gaskets applications. It remains flexible when dry, and exhibits good fuel resistance. It help to improves reliability, saves time and labor, and can be clean up easily.
A 100% RTV Silicone Sealant formulated for heavy duty applications. It makes reliable “formed-in-place” gasket that resist cracking, shrinking and migration caused by thermal cycling. Ideal to replace almost any cut gasket. Also use to seal, bond, repair, mend and secure glass, metal, plastics, fabric, vinyl, weather stripping and vinyl tops.
An amber epoxy adhesive formulated to give longer working time (90 – 180 minutes) for large assemblies with multiple components. It is the original heavy duty epoxy suitable for most conditions. It exhibits a remarkable combination of properties, high mechanical strength, excellent chemical resistance and reliable heat resistance. It is easy to machine and non-conductive.
Paint Remover which penetrates into successive coats of paint, vanish or enamel. It is super strong and fast reacting yet non caustic hence will not damage bared surfaces. It is highly viscous and can be applied on vertical surfaces. It also contains surfactant which improves penetration of the paint remover.
