Menu
A rapid setting, general purpose, 1:1 mix ratio epoxy adhesive. It exhibits a remarkable combination of properties; fast setting, good resistance towards water, most solvents and automotive oils. It can be used as an adhesive on various substrates, to fill gaps and surface repairs. It can be sanded, does not shrink upon curing and does not crack if drilled. It cures clear can be handled after an hour.
A rapid setting, general purpose, 1:1 mix ratio epoxy adhesive. It exhibits a remarkable combination of properties; fast setting, good resistance towards water, most solvents and automotive oils. It can be used as an adhesive on various substrates, to fill gaps and surface repairs. It can be sanded, does not shrink upon curing and does not crack if drilled. It cures clear can be handled after an hour.
Suitable for bonding metal, wood, plastic, china, ceramics, tools, and glassware.
1 oz. (28.4 g)/pack
Inner Box:12, Outer Carton:144
Gasket Shellac is a hard setting, slow drying liquid for gaskets repairing and sealing. It can seal the metal gasket and threaded connections for light duty service. It is suitable also for felt, paper, rubber and composition type gaskets applications. It remains flexible when dry, and exhibits good fuel resistance. It help to improves reliability, saves time and labor, and can be clean up easily.
A semi-drying grey liquid gasket that uses synthetic rubber as the main ingredients. It is formulated to form a layer thick enough to work efficiently on uneven joint surfaces. It exhibits good resistant to heat, oil, gasoline and particularly LPG. It turns into rubber-like elastic substance upon curing.
A 100% RTV Silicone Sealant formulated for heavy duty applications. It makes reliable “formed-in-place” gasket that resist cracking, shrinking and migration caused by thermal cycling. Ideal to replace almost any cut gasket. Also use to seal, bond, repair, mend and secure glass, metal, plastics, fabric, vinyl, weather stripping and vinyl tops.
An original gasket maker formulated for heavy duty applications. It forms reliable “formed-in-place” gaskets that resist cracking, shrinking and migration caused by thermal cycling. Ideal to replace almost any cut gasket and can be used to coat pre-cut gaskets to increase reliability. It is permanently flexible and stable at temperature of between -80 °F to 600 °F (-62 °C to 315 °C). It is also highly resistant to automotive fluids.
